Tutorial On How To Repair Detectable But Corrupt USB DRIVES

Have you suddenly encountered
with the problem that when you
plug in your USB drive, the
Removable media shows up but
when you try to open it, it returns
with the message “Please insert a
disk in to drive H:”.
If yes then you have been on right
tutorial page.
By applying this simple method
you ’ll have 80 % chance to get back
your USB drive hardware.
This works only in the above error
condition. If the windows doesn ’t
detect your USB drive, then there is
probably flaw in the USB media.
Please keep in mind that, you’ll have
to lose your data when following
this tutorial.
Plug in your USB drive.
Go to Start>My Computer, right click
on My Computer icon and click on
Manage menu.

Computer Management window will
pop up. Click on Disk management
under Storage tree menu.

Now at the right side of the window
right click on your removable media.
(unlike the image below, it will show
unknown information), right click on
your removable media and choose
Change Drive Letter and Paths.

Now in new window choose any
drive later that is not taken by any
media (M:, N: , :K: etc).
Click on ok button and close the
management window. Try opening
your pendirve. There may be the
chance to have your pendrive
recovered if this method worked.
If the problem still prevails then
follow the above tutorial but instead
of choosing Change drive letter and
paths, choose Format and give a
quick format to it.

Now you’ll have finally lost your data
but the pendrive is safe in your
hands.
Hope this tutorial was working. If it
didn ’t please do comment me. I’ll
find other solutions as well.